Take Control of Your ProductionWith Automation
The RoboCAP provides a filling system that can meet all your current and future filling needs with one robot.
Select your Product
Cartridges
Output Per Hour 1,200 - 2,000
Designed to optimize low-volume product filling (up to 5ml) for maximum efficiency, our RoboCAP RL-300 Volumetric (VF) utilizes backpressure, heat and volumetric displacement to guarantee a +/- 2% filling accuracy with the same speed and consistency as our other RoboCAP systemsClients can upgrade to 2 nozzles with our heating and mixing system and 4 nozzles without heating to meet every company’s production demands!
Specifications
Fill Rate (Per Hour)*
1,200 - 2,000
Weight (kg)
30
Width (mm)
485
Height (mm)
590
Depth (mm)
500
Power Supply
AC 110 - 220V 300W
Dispense Accuracy
+/- 2.5%
Dispensable Volume Range
0.1ml- 1.3ml
Temperature Range
0C - 40C
*Based on 0.5g cartridge
Components
Volumetric Filling Nozzle
Designed to optimize low-volume product filling, the VF nozzle dispensed product with a +/- 2% filling accuracy. Set the exact product volume you want and start filling!The product is pushed through the line from the pressure vessel and into the syringe through the VF dual valve where is it then dispensed out of the nozzle tip and into the cartridge or capsule.
Visit our suppliers:
Pressure Vessel
The bottom-out pressure vessels are designed with back pressure to guarantee all product flows evenly and consistently through the tubing. This ensures every bit of product is not wasted and reduces the chance of air bubbles in your product.The stainless-steel tanks range from 1L, 1g, 3g, 5g, and 10-gallon in size. All our pressure vessels are compatible with our mixers and heating systems for even heat distribution throughout the tank and cleaner filling process.
Visit our suppliers:
Capping Solution
Our capping solutions allow you to safely and efficiently close your press top cartridge caps within 45 seconds. This reduces any chance of leaking, clogging, or oxidation that may compromise product quality.
Visit our suppliers:
Ready to Fill Right Out of the Box
Pre-racked cartridges and Mouth Pieces
AVD’s C3 Eazy-Press cartridges come pre-racked and ready to fill, right out the box. Simply load AVD’s pre-racked cartridge tray directly onto ATG’s RoboCAP RL-302VF filler - no more loading one-by-one. To cap, simply place AVD’s pre-racked mouthpiece tray over your filled C3 Eazy-Press cartridges, and press up to 50 units at a time with ATG’s MonoBlox Press
Load
Trays are pre-racked with cartridges that can be loaded directly onto our RoboCAP. No more tedious loading and unloading by hand.
Fill
Fill cartridges in under 2 minutes with our RoboCAP RL-302VF. Capable of filling & capping press down cartridges, pens, and pods.
Press
Simply unload the pre-racked tray from the RoboCAP, directly onto the cartridge press, and close all cartridges in seconds.
MonoBlox Press
Cartridge Press
The MonoBlox Product Suite consists of the MonoBlox, the MonoPress, and the MonoTray. This setup is ideal for filling & capping press top cartridges. The MonoBlox are custom cut for your cartridge sizes and are removable from the MonoTray so that the closing process can begin while the machine continues to fill. This eliminates any chance of leaking, clogging or oxidization.The system derives off of air pressure and is the perfect addition to your cartridge production line.
MonoBlox Pressin Action
The MonoBlox Product Suite consists of the MonoBlox, the MonoPress, and the MonoTray. This setup is ideal for filling & capping press top cartridges. The MonoBlox are custom cut for your cartridge sizes and are removable from the MonoTray so that the closing process can begin while the machine continues to fill. This eliminates any chance of leaking, clogging or oxidization.
We use Cookies to enhance your experienceDetails